In GeoHECRAS, the Compute Infiltration command allows the user to define the precipitation infiltration method (i.e., SCS Curve Number, Green and Ampt, or Deficit Constant) to be used for computing the 2D surface losses from a storm event.
Follow the steps below to use the Compute Infiltration command:
- From the Watershed ribbon menu, select the Compute Infiltration command.
- The Compute Infiltration dialog box will be displayed.
The following sections describe the Compute Infiltration command and how to interact with the above dialog box.
Selecting Infiltration Method
The Select Infiltration Method section allows the user to define the infiltration method to be used for computations.
- Infiltration method
This dropdown combo box allows the user to select the infiltration method. The dropdown combo box contains the following options:
- Deficit and Constant
- Green and Ampt
- SCS Curve Number (default)
- Time between rainfall events
This entry field allows the user to define the time between rainfall events.Note that this field will only be enabled if the SCS Curve Number is selected as the infiltration method. Otherwise, this field will be disabled.
- Infiltration source
This dropdown combo box allows the user to select the source for defining the infiltration layer data. The dropdown combo box contains the following options:
- Land Cover & Soil Layers (default)
- Shapefile Layer
Note that based on the infiltration source selected, the contents of the Define Infiltration Data section will be changed.
Defining Infiltration Data
The Define Infiltration Data section contains two panels: Land Use Data and Hydrologic Soil Type Data. These panels are used to define the infiltration parameters for computing the various infiltration methods. Based upon the option selected in the Infiltration source combo box entry in the Select Infiltration Method section, the contents of this section will be modified accordingly.
Note that if the Land Cover & Soil Layers option is selected as the infiltration source, then the Land Use Data panel, as shown below, will be similar for all three infiltration methods (i.e., Deficit and Constant, Green and Ampt, SCS Curve Number).
Land Use Data Panel
The Land Use Data panel allows the user to describe the land use data. This panel contains the following subpanels:
Land Cover Grid
The Land Cover Grid subpanel allows the user to select an existing land cover grid. The Existing land cover grid dropdown combo box contains all the land cover grids added to the project.
Hydrologic Soil Type Data Panel
The Hydrologic Soil Type Data panel allows the user to describe the soil grid data.
This panel contains the following subpanel:
The Soil Grid subpanel allows the user to select an existing soil grid. The Existing soil grid dropdown combo box contains all the soil grids added to the project.
Selecting Shapefile Layer as Infiltration Source
If the user selects the Shapefile Layer option as an infiltration source in the Select Infiltration Method section, the contents of the Compute Infiltration dialog box will be changed as shown below.
Selecting Classification Shapefiles
The Select Classification Shapefile section controls the selection of shapefile layers to be used for computing the infiltration. In this section, the user can add already loaded shapefiles using the Shapefile layer dropdown combo box.
From the Shapefile layer dropdown combo box, select the shapefile layers, one at a time, and click the [Add] button. The selected shapefile(s) will be added to the Selected shapefiles grid. Alternatively, click the [Add All] button to add all the shapefiles available in the project.
To change the order of the added shapefile(s) in the grid, select the appropriate row and right-click to display a context menu. Then, select the Move Layer Up or Move Layer Down context menu command to change the order of the highlighted shapefile layer. Alternatively, select the up or down arrows option adjacent to the highlighted layer to change the layer order.
Note that shapefile layers that are higher in the listing have precedence over layers that appear lower in the list.
This section allows the user to select the corresponding shapefile fields to map to the required attributes. Based upon the infiltration method selected in the Select Infiltration Method section, the dropdown entries contained in this section will be changed.
The following dropdown combo box attribute entries are provided when the SCS Curve Number option is selected as an infiltration method in the Select Infiltration Method section.
The following dropdown combo box attribute entries are provided when the Deficit Constant option is selected as an infiltration method in the Select Infiltration Method section.
The following dropdown combo box attribute entries are provided when the Green and Ampt option is selected as an infiltration method in the Select Infiltration Method section.
Infiltration Layer Definition
The user can define various mapped parameters using the [Infiltration Layer Definition] button. Clicking on this button will display the Infiltration Layers Definition dialog box specific to the infiltration method selected.
Infiltration Layer Limits
This section allows the user to define the limits of the infiltration layer to be generated.
The following options are provided:
- User-defined limits
Selecting this option allows the user to manually define the limits of the infiltration layer from the Map View. After selecting this option, the user can click the [Pick] button and draw a rectangular region on the Map View to define the limits of the infiltration layer.
- Clipping polygons
Selecting this option allows the user to select the polygon shape regions on the Map View to define the limits of the infiltration layer. After selecting this option, the user can click the [Pick] button to select one or more clipping polygons from the Map View, and the software will then clip the boundary of the selected polygons. The software will set the limits of the layer to the extent of the selected polygons.
- Model extents
Selecting this option causes the software to use the current model extent to define the infiltration layer limits. If a project model has been defined, this option will create a bounding rectangular region to correspond to the extent of the defined model, plus an additional buffer boundary.
Infiltration Layer Processing Specifications
This section details how the infiltration layer data should be processed.
The Infiltration grid file entry is used to define the name and the directory address where the infiltration layer grid file will be saved.
The Load grid as map layer checkbox option causes the software to add the infiltration grid as a layer in the Map Data Layers panel. By default, this checkbox option is checked. The software automatically defines the name of the map data layer based on the infiltration grid file name provided by the user. However, the user can edit the map layer name using the edit tool present next to the Load grid as map layer entry field.
The Infiltration grid CRS dropdown combo box allows the user to define the layer’s CRS (Coordinate Reference System). If there is only one CRS in the project, the software automatically selects it.
The Infiltration grid cell size spin control button allows the user to manually define the grid cell size. The finer the grid resolution (or smaller the cell size) defined, the greater the detail that can be represented in the infiltration grid. By default, the software uses a value of 10 ft.
Based on the defined grid cell size and the extent of the infiltration layer, the Grid resolution details pane displays the total number of cells and the number of columns and rows that the infiltration layer grid file will contain.
Infiltration Layer Grid Computation
After defining the required infiltration parameters in the Compute Infiltration dialog box, click the [Create] button. The software will then combine the source infiltration layers to create a single composite infiltration layer grid file. This layer will be an HDF file created by the intersection of the different land use and soil group data polygons, thereby creating sub-polygons containing a corresponding land use and soil group.
In the Map Data Layers panel, the software provides a data legend for each created infiltration layer that lists the infiltration data included within that layer. The user can expand the layer to view the data legend.
Clicking on the […] button adjacent to the created Infiltration Layer will display the Infiltration Grid Properties dialog box, allowing the user to define the color and style of the infiltration layers.