Assign Terminal Outfall Elevations Command
In GeoSTORM software, the Assign Terminal Outfall Elevations command allows the user to assign elevations to the selected terminal outfall(s).
In GeoSTORM software, the Assign Terminal Outfall Elevations command allows the user to assign elevations to the selected terminal outfall(s).
What are Curve Numbers? A curve number (CN) is a hydrologic parameter used to describe the stormwater runoff potential for
An impervious surface is a hard surface that prevents or stops water from entering the soil mantle or causes water
Computing subbasin slopes is a critical aspect of hydrologic modeling and watershed analysis. Some of the runoff methods being used
The Connect Downstream command allows the user to automatically assign subbasin connections to the next downstream junction. It also allows
Stormwater pumps are used in situations where gravity drainage is either impossible or impractical. Stormwater pumping is expensive to operate
The Riser Outflow Pipe panel of the Storage Area Data dialog box allows the user to define general parameters for
The Storage Area Culvert panel of the Storage Area Data dialog box allows the user to define general parameters for
The Storage Area Spillways panel of the Storage Area Data dialog box allows the user to define a spillway that
The Underground Storage Chamber panel of the Storage Area Data dialog box allows users to define the underground storage chamber