1. Home
  2. Knowledge Base
  3. GeoHECHMS
  4. Compute Critical Storm Command

Compute Critical Storm Command

A critical duration analysis must be conducted to determine the proper storm duration for computing design flows. In a critical duration analysis, a range of storm durations is evaluated to identify the storm duration that produces the greatest peak flow or volume.

The critical duration will vary by watershed, depending on the size, drainage characteristics, and water management infrastructure. It is determined by comparing various durations of the specified storm frequency and calculating the peak rate and/or runoff volume for each. For example, a 30-minute event might be the critical storm duration for sizing catch basin inlets and storm sewers from small watersheds. However, longer duration events such as the 3-hour, 12-hour, or 10-day runoff events might be the event durations that result in the most severe flood levels for lakes.

Critical Duration Analysis for Flood Control

The accurate assessment of flood risk and flood damages and the sizing and design of flood control projects in any watershed relies on the peak flood discharges, the peak flood stages, and the maximum runoff volumes generated for that watershed. Peak discharges, stages, and runoff volumes can be determined through the application of rainfall runoff and hydraulic methodologies that utilize “critical” design rainfall events (volume, duration, and temporal distribution) to generate runoff hydrographs from designed rainfall events.

FEMA guidance states that the critical storm is a design storm, which provides the highest flood discharges/water surface elevations for the flooding source. In practice, it is often assumed that the 100-year, 24-hour duration storm produces the critical or highest flood discharges, stages, and runoff volumes throughout the watershed. However, the actual critical duration design storm may be something other than the 24-hour design event, and there may be more than one critical duration storm that produces critical flood discharges, stages, and storage volumes across the watershed.

A critical duration analysis is required to estimate representative peak discharges and flood stages and to properly size flood control projects. A critical duration analysis can be performed to determine the critical duration storm specific to each watershed, and each study reach across the watershed. Typically, flood discharges and stages for the 1-, 3-, 6-, 12-, 24- and 48-hour storm durations for the 100-year frequency event are generated to identify the critical duration which produces the highest peak flows and stages for all study locations within the watershed. Performing this analysis and using the resulting critical duration events helps to ensure that the hydrologic/hydraulic models produce the highest flood discharges and stages across the watershed.

Detention Pond Critical Duration Storm

The critical duration analysis allows the user to quickly go through several iterations in sizing a detention pond and the corresponding outfall structure to accommodate the required design storms.

The storm duration that produces the greatest volume of storage and highest ponded depth within a detention pond is considered the critical duration storm. Reservoir routing computations for the detention pond will require incorporating several different duration storms to determine the critical duration and the highest pond level for each frequency storm required. The operation of any basin is dependent on the interaction of:

  • Inflow (hydrograph)
  • Storage characteristics of the basin
  • Performance of the outlet control structure

Therefore, each detention pond will respond to different duration storms in dissimilar patterns. The approximate critical storm can be estimated, but the actual critical duration storm can only be determined by performing reservoir routing computations for several different duration storms.

Critical Duration Storm

In GeoHECHMS, the Compute Critical Storm command allows the user to perform an analysis to determine the critical duration storm that corresponds to a particular storm duration and frequency.

Follow the steps below to use the Compute Critical Storm command:

  1. From the Analysis ribbon menu, select the Compute Critical Storm command.
    Compute Critical Storm ribbon menu command
  2. The Compute Critical Storm dialog box will be displayed.
    Compute Critical Storm dialog box

The following sections describe how to use the Compute Critical Storm command and interact with the above dialog box.

Defining Storms

The Define Storms panel is used to define the storms to be analyzed to determine the critical storm.

The following entries are provided in this panel:

Storm Duration

The dropdown combo boxes under the Storm Duration column list the storm durations to be analyzed. The defined durations are then applied to the defined Rainfall Distribution. The Storm Duration dropdown combo box lists the following entries:
Storm Duration dropdown combo box

When the user selects a storm duration for a different row, then the current row’s dropdown combo box entry has the previously selected storm duration removed. In that way, the user only sees those storm durations that have not yet been defined. The user can also drag and drop the defined rows to change their top to bottom order.

Rainfall Distribution

This column entry allows the user to select the rainfall distribution to be applied to the defined storm duration. The user can click the […] lookup button to display the Rainfall Distribution dialog box.
[…] lookup button

The Rainfall Distribution dialog box allows the user to select the rainfall distribution. Note that only percentile-based rainfall distribution will be available for selection.
Rainfall distribution dialog box

After selecting a rainfall distribution, click the [Assign] button. The name of the rainfall distribution is then displayed in the Rainfall Distribution entry.

Note that if the user selects a rainfall distribution that does not match the selected storm duration, the software will scale the selected rainfall distribution with the selected storm duration.

To learn more about the Rainfall Distribution dialog box, refer to this article in our knowledge base.

Storm Frequency

The dropdown combo boxes in the first row of the Storm Frequency & Precipitation (in) section list the storm frequency to be analyzed. This value is used to look up the corresponding rainfall precipitation amount. The dropdown combo box lists the following entries:
Storm Frequency dropdown combo box

When the user selects a storm frequency for a different column, then the current column’s dropdown combo box entry has the previously selected storm frequency removed. In that way, the user only sees those storm frequencies that have not yet been defined. The only exception to this is the Custom option, which allows the user to define a custom storm frequency. Multiple custom storm frequencies can be defined. The user can also drag and drop the defined columns to change their left to right order.

Custom Storm Frequency

The Custom option allows the user to define a custom storm frequency.
Custom button

On selecting the Custom option, the Custom Storm Frequency dialog box will be displayed, allowing the user to define the custom storm frequency.
Custom Storm Frequency dialog box

The following entries are provided in the above dialog box:

  • Storm frequency label
    This entry field allows the user to define the label for the custom storm frequency.
  • Storm frequency
    This entry field allows the user to enter the storm frequency value in years. The field accepts only positive, non-zero integers.

After providing values for the above entries, the user can click the [OK] button and the custom storm frequency will be defined.

After the custom storm frequency is defined, the user can click on the pencil icon to edit the storm frequency.
pencil icon to edit the storm frequency

Note that if the user names the column the same as one of the pre-defined columns, then the NOAA rainfall retrieval ignores the column.

Storm Precipitation

The empty fields contained in the data grid of the Storm Frequency & Precipitation (in) section are used to store the storm precipitation data. The user can either manually enter the values or have the software automatically fill in the data grid. Clicking on the [Retrieve from NOAA] button will retrieve corresponding precipitation data and populate the data grid for the defined Storm Durations and Storm Frequencies from NOAA Atlas 14.
Populating precipitation data using [Retrieve from NOAA] button

Note that the software will ignore the corresponding data fields of the columns that have been populated with custom storm frequencies. The user is required to manually enter the precipitation values for these storm frequencies.

Additionally, the user can right-click anywhere on the data grid to display the context menu commands.
right-click context menu

The following commands are provided in the context menu:

  • The Cut, Copy, and Paste commands allow the user to cut, copy and paste the data into the data grid.
  • The Insert Row command allows the user to insert a row just above the row where the cursor is located.
  • The Delete Row(s) command allows the user to delete the row where the cursor is located.
  • The Insert Column command allows the user to insert a column to the left of the column where the cursor is located.
  • The Delete Column command allows the user to delete the column where the cursor is located.
  • The Copy Table to Clipboard command allows the user to send the data to the Windows clipboard.
  • The Export Table to Excel command allows the user to export table data into an Excel document.
  • The Export Table to PDF command allows the user to export table data into a PDF document.
  • The Delete command allows the user to delete the desired cell(s)/column(s) value shown in the table data.

Clearing Data from the Table

The [Clear Data] button allows the user to clear the entire contents of the data grid, including the storm duration, rainfall distribution, storm frequency, and NOAA retrieved precipitation data.
[Clear Data] button

Sorting Storm Durations

The [Sort Durations] button allows the user to sort the storm duration rows in ascending order. The custom storm durations will be placed last and in ascending order.

Sorting Storm Frequencies

The [Sort Frequencies] button allows the user to sort the storm frequency columns in ascending order. The custom storm frequencies will be placed last and in ascending order.

Performing Analysis

The Perform Analysis panel is used to define general information relating to the detention pond to be designed and analyzed.
Perform Analysis panel

Note that the [Compute] button will be grayed out until the user has selected a basin model.

The following sections are provided in this panel.

Selecting Basin Models (Scenarios) to Analyze

The Select Basin Models (Scenarios) to Analyze section lists all the defined basin models (geometry data). The user can select which basin models to be analyzed. The Compute Scenario checkbox in the topmost row allows the user to select and deselect all rows. The software lists the basin models in alphabetical order. In addition, the user can use the Up and Down arrow buttons on the right side of each row to move the listed basin models.

Defining Analysis Options

The Define Analysis Options section allows the user to define the path and file name where the analysis results are to be saved. Click the […] browse button, and the software will display the Save HEC-HMS Critical Analysis Project dialog box. From the displayed dialog box, browse to the location to save the file, enter the file name, and then click the [Save] button.
Save HEC-HMS Critical Analysis Project dialog box

The user will be returned to the Compute Critical Storm dialog box, and the complete directory path and the file name will be shown in the HEC-HMS project file entry.

Note that the software creates a single project file that contains references to the Basin Geometry, Meteorology, and Run files that need to be computed.

Simulation Progress

This section displays progress in computing the different storm analyses to determine the critical storm duration. The progress bar at the bottom shows which model run is currently being performed.

Computing Analysis

When all the options have been properly defined, click the [Compute] button to initiate the simulation. While the simulation is running, the button changes to [Cancel] so that the user can cancel the simulation if desired.

Clicking on the [Copy to Clipboard] button allows the user to copy the contents of the simulation section to the Windows clipboard.

Peak Flows

This panel is used to review the simulation results. It lists all the computed peak flows for all storms and all defined elements in the model.
Peak Flows panel

The following entries are defined in this panel:

Scenario

This column represents the basin models (i.e., scenario) that were analyzed. Clicking on the Filter icon will display the dropdown filter listing all the basin models.
Scenario dropdown combo box

The user can select the checkboxes corresponding to the basin models to be displayed in the Computed Peak Flows output data grid and click the [Apply] button. The user can click the [Clear] button to cancel all the previous selections and redo the entire process.

Element

This column represents the model elements that were analyzed in each basin model. Clicking on the Filter icon will display the dropdown filter listing all the model elements (excluding subbasins) contained in the selected scenarios.
Element dropdown combo box

The user can select the checkboxes corresponding to the desired elements to be displayed in the Computed Peak Flows output data grid and click the [Apply] button. The user can click the [Clear] button to cancel all the previous selections and redo the entire process.

The following entries are contained in the dropdown filter.

  • Basin geometry (scenario)
    This dropdown combo box entry only lists the scenarios that have been selected in the Scenario dropdown filter. The software lists the scenarios in alphabetical order.
  • Element type
    This dropdown combo box entry lists all the element types defined in the current scenario. The software lists the scenarios in alphabetical order. By default, the All option is selected.
  • Data grid
    The data grid shows the elements that can be selected and deselected. The software lists the elements in alphabetical order.

Storm

This column represents the storms that were analyzed. Clicking on the Filter icon will display the filter dropdown listing all the storm durations that were analyzed.
Storm dropdown combo box

The user can select the checkboxes corresponding to the desired storm durations to be displayed in the Computed Peak Flows output data grid and click the [Apply] button. The user can click the [Clear] button to cancel all the previous selections and redo the entire process.

Note that the dropdown filter lists only those storm durations that were defined in the Define Storms panel.

Maximum Peak Flow

The maximum peak flow row labeled as Maximum is displayed at the third to bottom row of each element section. It contains the maximum peak flow that was computed for the storms listed for that element. If there was only one storm row listed, then this row is hidden.

Critical Storm

The critical storm row labeled as Critical Storm is displayed as the second to the bottom row of each element section. It contains the storm name that generated the maximum peak flow that was computed for the storms listed for that element. If there was only one storm row listed, then this row is hidden.

Time to Peak

The time to peak row labeled as Time to Peak is displayed as the bottom row of each element section. It corresponds to the time period in decimal hours from the start of a critical storm to its peak discharge.

Peak Flows Data Grid

The Peak Flows (cfs) data grid cells are colored to represent the minimum and maximum values for that column. The cell that holds the minimum value is colored green. The cell that holds the medium value is colored yellow, and the cell that holds the maximum value is colored red.

Peak Stages

This panel is used to review the simulation results. It lists the computed results only for the reservoir (i.e., storage areas) element type that contains a stage (i.e., depth) value.
Peak Stages panel

Note that the Peak Stages panel shows similar results to that of the Peak Flows panel—but shows results of the stage (i.e., depth) rather than flow. The Time to Peak is reported for inflow and outflow (i.e., discharge).

Exporting Data to HEC-HMS

After performing the analysis, the user can click the [Export to HEC-HMS] button to export the critical duration data to be used in a HEC-HMS model so that the user can run this analysis in HEC-HMS.
[Export to HEC-HMS] button

On clicking the [Export to HEC-HMS] button, the software will display the Export to HEC-HMS dialog box. The user can browse to the location to save the file, enter the file name, and click the [Save] button to save the data as a zip file.
Export to HEC-HMS dialog box

Note that the user can also export the data defined in the storm and precipitation grid under the Define Storms panel without running the analysis.

About the Author Chris Maeder

  • Was this helpful?
  • YesNo

Was this article helpful?

Related Articles